Remote control unit, Connect dvd player to other appliances, Operations – Naxa NDL-431 User Manual

Page 3

Advertising
background image

REMOTE CONTROL UNIT

1. INFO button
2. OPEN/CLOSE button
3. NUMERIC buttons
4. TITLE button
5. P/N button
6. ANGLE button
7. AUDIO button
8. ALSET button (ALARM SET button)
9. CLOCK button
10. SUBTITLE button
11. BAND button
12. NAVIGATION LEFT / M- button
13. EQ button
14. NEXT & F.FWD button
15. PREVIOUS & F.BWD button
16. TUNE/UP button
17. TUNE/DOWN button
18. MENU button
19. STANDBY button
20. FUNCTION button
21. DVD/USB/CARD button
22. SETUP button
23. SEARCH button
24. PROGRAM button
25. STOP button
26. PLAY/PAUSE button
27. ZOOM/SLOW button
28. REPEAT button
29. BUZZER button
30. STORE button
31. NAVIGATION UP button
32. SLEEP button
33. OK button
34. NAVIGATION RIGHT / M+ button
35. NAVIGATION DOWN button
36. MUTE button
37. VOL- button
38. VOL + button

1

2

3

4
5
6
7
8
9

10
11
12
13
14
15
16
17

19

18

20

21

22
23

24
25
26
27
28
29
30
31
32
33
34
35
36
37
38

After connection is firmed and securely done, plug AC cord to
an applicable wall outlet and turn on the player.

CONNECT DVD PLAYER TO OTHER
APPLIANCES

It is recommended you connect the player to a multi-system
TV.
Ensure that this player and other appliances (TV set and
amplifier) that will be connected to the player are set to OFF
mode and that the AC cord are disconnected from the wall
outlet.
Avoid blocking ventilation holes of the connected appliances
and make sure air around there can circulate freely.
Read carefully and follow the instructions before connecting
other appliances.
Ensure that you observe the color coding when connecting
audio, video cables. If the RCA adapter is supplied only, the
audio/video RCA cable is required. Plug one end of the RCA
adapter to the unit. Then connect the audio/video RCA cable
to the RCA adapter and the television.

A/V cable

AUDIO R AUDIO L VIDEO IN

S-VIDEO

YUV INPUT

AV AUDIO/VIDEO INPUT

TV SET

2

OPERATIONS

PREPARATION
Power on the TV set and select video input mode.
Power on the audio system which is connected to the player.

1. Press STANDBY key to turn on the player. Press

FUNCTION button repeatedly to switch to DVD mode.

2. Press disc cover Open/Close button to open the disc tray.
3. Place a disc onto the disc tray.
4. Close the disc tray via disc cover Open/Close key and the

playback starts automatically.

5. When a menu screen appears on the TV, press the navigation

buttons or press the numeric buttons to select a preferred
track number, then press OK button to start playback.

GET STARTED

ADJUST THE VOLUME

MUTE

SKIP AHEAD OR BACK

Press VOLUME+/- button to increase or reduce the volume
with volume value indicated on the small LCD during
playback.

While the power is on, the audio output of the main unit is to
be shut off by pressing the button. Press it again or press
VOLUME+/- button to resume sound output.

Press PREV button during play to skip previous chapter
(DVD) or a track (CD), Press NEXT button during play to skip
next chapter (DVD) or a track (CD).

Advertising