Naxa NDL-429 - Manual (Page 6)

5
OPERATIONS
PREPARATION
GET STARTED
SKIP AHEAD OR BACK
REPEAT
Power on the TV set and select video input mode.
Power on the audio system which is connected to the player.
1. Turn on the player and slide FUNCTION switch on the
main unit to DVD position.
2. Press the disc tray OPEN/CLOSE area to open the disc
tray.
3. Place a disc onto the disc tray.
4. Close the disc tray by hand and the playback starts
automatically.
5. When a menu screen appears on the TV, move the navigation
buttons or press the numeric buttons to select a preferred
track number, then press OK Button to start playback.
reduce
Press NEXT&F.FWD or PREV&F.BWD button once during
play to skip a chapter (DVD) or a track (CD) ahead or
backwards.
During playback, press and hold NEXT & F.FWD or
PREV&F.BWD button several times to scan the disc forward
or backward at X2, X4, X8, X20 normal speed.
Press PLAY button to resume normal play.
During playback, press PLAY/PAUSE button to pause; to
resume normal play, press PLAY button again.
Press STOP button during playback to stop playback; the
player activates its resume function when STOP is pressed in
STOP mode; press PLAY button again, playback resumes at
the point it stopped previously; open the disc tray or press the
STOP button one more time to clear the resume function.
Press SLOW button on the remote control during playback,
the disc will be played at 1/2 normal speed at first, each time
this button is pressed, the play speed becomes slower (down
to 1/7 normal speed.)
Press PLAY button, normal play will resume.
Press REPEAT button during play, it will repeat play one
chapter/title or repeat all (for DVD disc), or repeat play a track
or all tracks (for CD), or repeat the sections between two
specific points (A-B).
1. Press SEARCH button during play and highlight the item to
be played (Title, Chapter, or Chapter time)by navigation
buttons
2. Input the desired number or time via the numeric buttons.
3. Press OK button to confirm and the playback from the
located scene starts.
4. To exit search menu, press SEARCH button directly.
1. Press PROGRAM during playback to display the program
menu.
2. Select location(s) to be memorized via navigation buttons and
then enter desired Titles/Chapters numbers via numeric
buttons.
RAPID ADVANCE/REVERSE
PLAY/PAUSE
STOP PLAYBACK
SLOW-MOTION PLAY (DVD)
SEARCH FOR PREFERRED SCENE
PROGRAM PLAY (UP TO 16 MEMORIES)
ADJUST THE VOLUME
Adjust the VOLUME controller on the main unit to increase or
the volume.
Note: Inputting leading zero is not necessary. If the
chapter/title/track number is behind the cardinal 10, press the
unit digit key first and then another unit digit. Some figure
inputs may be useless, because it 's greater figure than total
title/chapter/track number on the disc.
Example: Track 3, press "3"
Track 12, press "1" and then "2"
Track 21, press "2" and then "1"
3. To start programmed playback, select PLAY on the menu;
pressing PROGRAM button again to exit programming.
4. To clear programmed items, select the items and then press
CLEAR button on the remote control. To clear all items, select
the <CLEAR> on the menu, and then press OK button on
remote control.
5. You can also cancel program mode by clearing all the items in
the program menu.
Press the ZOOM key continuously to zoom in the picture by 2,
3, and 4 times, zoom out by 1/2, 1/3, 1/4 normal size.
Press this key once more when the picture is at 1/4 size to
return to the normal size display.
Scroll to view the enlarged picture using Navigation buttons.
When the player is in operation, press DISPLAY button
continuously on the remote control, the screen will display
parts of information (current disc type, title number, chapter
number, playtime, audio language, audio type, subtitle
language and multi angle, etc) in a sequence.
During playback, press MENU button to return to main menu
and press TITLE button to play the title.
Press BASS ON/OFF button on the main unit to turn on or off
the bass effect.
Press TFT ON/OFF button on the main unit to turn on or off
the TFT screen.
ZOOM PLAY
NOTE: When no soundtrack languages are recorded,
pressing this button will not work.
RETURN TO MAIN MENU AND PLAY THE TITLE (DVD)
BASS ON/OFF
TFT ON/OFF
ON SCREEN DISPLAY INFORMATION
MULTI-ANGLE VIEWING (DVD ONLY)
CHANGING SUBTITLE LANGUAGE (DVD ONLY)
Press ANGLE button during playback to select a desired
angle to view the scene.
Note: only the DVDs shot with multi-angle scenes have this
function.
Press SUBTITLE button during playback, the subtitle
language shown on the screen will change as a response to
each press;
When the desired language appears, release the button to
view the subtitle in that language.
Note: this function only works on the DVDs recorded with
multi-language subtitles.
CHANGING AUDIO SOUNDTRACK LANGUAGE(DVD)
It is possible to change the audio soundtrack language to a
different language from the one selected at the initial settings
(This operation works only with discs on which multiple audio
soundtrack languages are recorded).
Press AUDIO button during DVD disc play, the sound track
language changes with the current sound track number
shown on the TV screen.