Naxa NPB-250 - Manual (Page 4)

7 6
PLAY A DISC
1. Slide the Function switch to CD/MP3/AUX position.
2. Follow the steps above to load a disc.
3. The player begins reading disc immediately the CD door is closed, "READING" shows
in the LCD.
4. When the disc is successfully read, TOC (total of contents) shows in the LCD and
playback follows with the first track.
5. Press Play/Pause button once to halt music playback, the elapsed time of the current
track flashes and "PAUSE" appears on the bottom of the LCD to indicate the player in
Pause mode; press Stop button to cease music playback. The LCD shows the TOC
again with "STOP" on the bottom.
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY
REPEAT A SINGLE TRACK
REPEAT ALL TRACKS
RANDOM PLAY
INTRODUCTION PLAY
1. Press once the SKIP/SEARCH up button in music play to skip to the next track. To skip
to a specific track ahead, press this button several times.
2. Press once the SKIP/SEARCH down button in music play to skip to the previous track.
To skip to a specific track at back, press this button several times.
3. Press +10 /ALBUM button once in play to skip to the track 10 tracks ahead, twice to
skip to the track 20 tracks ahead. You can reach the last track of the disc using this
button.
4. Hold the SKIP/SEARCH up button in music play to search at quick rate for a specific
point to play.
5. Hold the SKIP/SEARCH down button in music play to search at quick rate for a specific
point to play.
To repeat a preferred track in playback, press MODE button once, "REPT 1" shows in the
LCD. Then select the preferred track using SKIP/SERCH buttons or +10/ALBUM button.
The player will repeat the chosen track until you press STOP button.
To repeat all tracks, press MODE button twice in play mode, "REPT ALL" shows in the LCD.
The player will repeat all tracks until you press STOP button.
Random play is that tracks on the disc are played by the player at random. Press MODE
button three times to enter this mode during play, "RANDOM" shows in the LCD. Tracks on
the disc will be selected at random for playback and the player stops automatically after all
tracks are played.
Introduction play is that the first ten seconds of each track are played in a sequential order.
Press MODE button four times to enter this mode during play, "INTRO" shows in the LCD.
Press MODE button to exit Introduction play mode and normal music play resumes. Press
SKIP/SEARCH up button in Introduction mode to begin Introduction play from the next
track immediately after the current track. Press SKIP/SEARCH down button in Introduction
mode to begin Introduction play from the current track.
You may press STOP button to exit random play mode and press
PLAY/PAUSE button to resume normal playback.
PROGRAMMED PLAY
MP3-CD PLAYBACK
SKIP TRACKS AND SEARCH FOR A SPECIFIC POINT TO PLAY
REPEAT A SINGLE TRACK
REPEAT ALL TRACKS
Programmed play is that tracks on the disc can be edited for playback in a preferred order
with the use of PROGRAM button.
In CD stop mode, press PROGRAM/EQ button once, "PROG" shows in the LCD with a
flickering track number and the program sequence indication "P-01", select the first track to
be programmed using SKIP/SEARCH buttons or +10/ALBUM button, and press
PROGRAM button again to store and advance to the next programming step. The program
sequence indication changes to "P-02" waiting for your next input.
Repeat the steps above to program more tracks. A maximum of 20 tracks can be
programmed in memory in a preferred order.
Press PLAY/PAUSE button to begin programmed play in the preferred order after you are
done with programming. The player stops automatically after all programmed tracks are
played.
You may press STOP button to terminate programmed playback. In program stop mode,
press STOP button again to clear the programming; press PLAY/PAUSE button to begin
the programmed playback with the programming order identical with the previous one done.
This player is capable of MP3-CDs. It takes longer time for this player to read an MP3-CD
than it does CD-DA. Wait patiently while it is reading.
After an MP3-CD is successfully read, the total number of albums and tracks shows in the
LCD together. And a second later, playback begins from the first track of the first album with
the icon of "Mp3" showing on the screen.
1. Press once the SKIP/SEARCH up button in music play to skip to the next track. To skip
to a specific track ahead, press this button several times.
2. Press once the SKIP/SEARCH down button in music play to skip to the previous track.
To skip to a specific track at back, press this button several times.
3. Press +10/ALBUM button once in play to skip to the track 10 tracks ahead, twice to skip
to the track 20 tracks ahead. You can reach the last track of the disc using this button.
4. Hold the SKIP/SEARCH up button in music play to search at quick rate for a specific
point to play.
6. Hold the +10/ALBUM button once during play, the album number flashes; select the
desired album using the SKIP/SEARCH buttons or the +10/ALBUM button; confirm this
album selection by holding +10/ALBUM button again, the track number"000" flickers for
your input; select the desired track of the chosen album using the SKIP/SEARCH
button or +10/ALBUM button. Finally, press PLAY/PAUSE button again to begin playing
this chosen track.
To repeat a preferred track in playback, press MODE button once, "REPT 1" shows in the
LCD. Then select the preferred track using SKIP/SERCH buttons or +10/ALBUM button.
The player will repeat the chosen track until you press STOP button.
To repeat all tracks, press MODE button twice in play mode, "REPT ALL" shows in the LCD.
The player will repeat all tracks until you press STOP button.
5. Hold the SKIP/SEARCH down button in music play to search at quick rate for a specific
point to play.