V-Tech DT47 Manual - Manual (Page 8)

Restore to Default
The restore to default function allows the user to recover the settings to factory setting.
Note that the restore to default operation will not change the setting and datas.
Enter main menu page,then touch User Setup icon to enter the setting page, press
Restore to default item, the default settings will be loaded. press Home icon to return to
home screen page.
Screen and Volume Adjustment
During monitoring or talking state, touch Adjust icon,the Adjust page will be
displayed.
1. The Scene mode selection: Total 4 screen
modes can be selected in sequence: Normal,
User, Soft and Bright. Whenever you modify
Brightness or colour, Scene item will be set to
User mode automatically.
2. The Brightness item is for the image quality setting, adjust the value to get the best
image you like.
3. The Talk Volume item is for talking volume adjustment.
4. Note that all the modifications will be performed immediately after the operation.
Touch icon to exit the adjust page.
9. Monitor Parameter Setting
1.Touch icon
on main menu page.
2.Touch UNLOCK
button and hold for 2s.
3.A digital keypad
will be shown.
How to enter the installation setting page
H/W DT47-CT
S/W V00.01.00
Local addr: 09.00
Unlock timing: 03
VD standard:AUTO
-7-