Philips SPE9010CC - Manual (Page 18)

Firmware Setup
CAUTION
ƒ
Never delete or rename the folder ‘Firmware’ on the Philips Multimedia Hard Disk. If deleted see ‘Recovery
procedure’.
ƒ Never turn off your Philips Multimedia Hard Disk during the firmware update procedure. This may damage
your device. If for any reason (E.g. Power supply failure during firmware update) the procedure fails, you may
not be able to operate your device.
ƒ Always use Philips firmware.
1. Visit the Philips support website at
www.philips.com/storageupdates
2. Go to the section of the Multimedia Hard Disk
3. Download the latest firmware (zipfile) to your PC
4. Extract the firmware files from the zipfile
5. Connect your Multimedia Hard Disk to your PC
6. Switch on the Multimedia Hard Disk
7. Copy the extracted files to the folder ‘firmware’ on your
Philips Multimedia Hard Disk
8. Switch off the Multimedia Hard Disk
9. Connect the Multimedia Hard Disk to your TV
10. Switch on the Multimedia Hard Disk
11. Select ‘Settings’ in the main menu and press OK, or press
the ‘Settings’ button
12. Select ‘Firmware Update” and press OK
13. Press OK to start update
14. After the firmware has been updated, turn off your
device to complete the update procedure
See chapters ‘How to connect to your PC’ and ‘How to connect
to your TV’ for more information on how to connect the devices
to your PC and TV.
18