VEGA Plug connector Harting HAN 7D for level sensors - Manual (Page 7)

3 Supplement
3.1 T echnical data
Materials
Contact support Polyamide
Contact copper alloy, hard silver plated 0.3 µm Ag
Plug housing Aluminium die-casting
Housing seal NBR
Temperature range
Plug connector - separate -25 … +125 °C (-13 … +257 °F)
Plug - mounted on the sensor the lowest temperature is applicable
Electrical data
Operating current 1) 10 A
Reference voltage 250 V
With mains supply (230 V), the switching circuit must be diverted from the supply circuit.
Insulation resistance > 10000 Ω
Reference surge voltage 0.8 kV, 1.2 µs, 50 µs
Protection rating
Plug connector - separate (locked
status) IP 65 (with seal screw)
Plug connector - mounted on the
sensor (connected status) The lowest protection category applies
1) Up to 45 °C (113 °F) ambient temperature, see derating of the manufacturer.
Plug connector Harting HAN 7D • for level sensors 7
3 Supplement
34456
-
EN
-120222