Scarlett SC-4006 - Manual (Page 3)

3
RADIO OPERATION
OPERATION
· Slide the On/Off/Auto switch to ON position.
· Select your desired broadcasting band with Band switch.
· Rotate the Tuning control knob to receive the desired broadcast.
· Adjust the level of sound with Volume control knob.
ANTENNA
· For FM reception, this set is specially equipped with the FM antenna, which is placed near
the power line cord.
WAKE TO RADIO
Having selected your station and set the volume at the desired level, proceed as follows:
· Slide the On/Off/Auto switch to AUTO position.
· Press the Alarm set button and whilst this button is depressed, press the Hour button and
then the Minute button until the time, when you would like to wake up, is reached. The wake
up time is now entered into the timer memory, thus the light indicator AUTO will light up. To
check the wake up time, simply press the Alarm set button and the clock will show the preset
time. The preset wake up time will continue to be registered in the timer memory and the
radio will switch on by itself at the same time the next day. To switch the radio off, simply
press the Alarm off button.
WAKE TO BUZZER
· Set the controls as for WAKE TO RADIO , but switch Volume control knob/Buzzer to
BUZZ position. The buzzer can then be switched off by pressing the Alarm off button or it
can be converted to the radio by selecting the On/Off/Auto switch to ON position.
SLEEP TO MUSIC
· The radio can be set to play and to switch off automatically for a length of time from 1 minute
to 1 hour 59 minute by following this procedure with all the controls preset in the WAKE
TO RADIO positions, depress the Sleep button and press the Minute button to count down
to the desired sleep time. To switch off the radio before the end of the registered sleep time
period, simply press the Snooze button.
SNOOZE CONTROL
· The Snooze button allows the user an extra sleep time of about 9 minutes after the radio
alarm is switched on at the preset wake up time. This can be repeated up to 5 times.
DIMMER
· You can adjust the dimmer of the display using the DIMMER switch:
- HI bright light of figures;
- LO normal light of figures.
MAINTENENCE AND CARE
· Switch off the appliance, unplug from the power supply.
· The outside of the appliance can be cleaned with a slightly damp cloth.
· Avoid leaving the clock radio in direct sunlight or in hot, humid, dusty places. Keep the set
away from heating appliances and appliances that generate noise, such as fluorescent
lamps and motors.