Installation of leg to sidewall, Legs and leg bracing – Grain Systems Tanks PNEG-1461 User Manual
Page 83
Advertising
13. Legs and Leg Bracing
PNEG-1461 12', 15', 18' and 21' Bulk Feed Tank Series and Grain Hopper Tank Series
83
Installation of Leg to Sidewall
Figure 13D
Use 5/16" x 1" bin bolts and nuts when attaching the leg to base. Make sure the washer is used on the
slot side of the leg.
When installing legs to sidewall, reverse normal insertion procedure on bolts. Place hex head and
neoprene washer to inside of sidewall, leaving threaded portion of bolt protruding outward. This
provides for a weather-tight seal at the leg attachment location. (See leg size chart
before
attaching legs.)
Figure 13E
Ref #
Description
A
5/16'' x 1'' Bin Bolt
Leg
Insert bolts from inside to
outside on all leg to tank
connections.
Advertising