Grain Systems Tanks PNEG-1400 - Manual (Page 16)

3. Bin Assembly
16 PNEG-1400 WCL Commercial 4" Corrugation Externally Stiffened Grain Bin
Bolting Requirements - 2 Stiffeners per Sidewall Sheet
• Use 3/8" x 1-1/2" (S-5060) bin bolts at splice locations to attach the stiffener/splice plate to the sidewall.
• Use 3/8" x 1-1/2" (S-5060) bin bolts on laminated stiffeners to attach stiffeners to the sidewall sheet.
• Refer to Stiffener Assembly Details on Page 35 and the Caulking Detail on Page 19 for stiffener
assembly hardware usage and caulking details. Refer to Hardware identification section
on Page 18 for aid in hardware identification.
Figure 3C As Viewed from Outside
Sidewall Gauge Horizontal Seam Vertical Seam Stiffener to Sidewall Overlap Seam
20-15
5/16" x 3/4" (S-275)
[8]
5/16" x 3/4" (S-275)
[42]
3/8" x 1" (S-455)
[22]
5/16" x 3/4" (S-275)
[2]
14-12
3/8" x 1" (S-455)
[20]
3/8" x 1" (S-455)
[42]
3/8" x 1" (S-455)
[22]
3/8" x 1" (S-455)
[2]
11-9
7/16" x 1" (S-9312)
[20]
7/16" x 1" (S-9312)
[42]
3/8" x 1" (S-455)
[22]
7/16" x 1-1/2" (S-3885)
[2]
8
7/16" x 1" (S-9312)
[20]
1/2" x 1-1/2" (S-9307)
[42]
3/8" x 1-1/2" (S-5060)
[22]
7/16" x 1-1/2" (S-3885)
[2]
13L-6L
(Laminated)
7/16" x 1-1/2" (S-3885)
[20]
1/2" x 1-1/2" (S-9307)
[63]
3/8” x 1-1/2" (S-5060)
[22]
7/16" x 1-1/2" (S-3885)
[4]