Wilwood Dynapro Dust-Boot Pro Series Front Brake Kit - Manual (Page 3)

Parts List
General Information
Installation of this kit should ONLY be performed by persons experienced in the installation and proper operation of disc brake systems.
Before assembling the Wilwood front disc brake kit, double check the following items to ensure a trouble-free installation.
•Make sure this is the correct kit to match the exact make and model year of the vehicles spindle (i.e., hubs for a 1970 Camaro spindle
will not fit a 1982 Camaro spindle).
•Verify wheel clearance using Figure 2.
•Inspect the package contents against the parts list to ensure that all components and hardware are included.
•Verify the new hub stud pattern in this kit matches the lug pattern of the vehicles wheels.
1
2
2A
3
4
5
6
7
8
8A
9
10
11
12
13
14
14A
15
16
17
18
19
20
21
21A
22
23
24
25
26
27
1
2
2
6
2
2
2
2
2
2
10
2
2
2
2
2
2
12
10
2
2
2
2
2
2
4
4
16
1
2
2
249-10994/95
240-0976
300-3415
240-7096
240-1347
230-10899
240-11102
230-0819
230-10421
230-10422
230-2187
270-7274
370-0879
380-0927
300-3307
160-5840
160-7099/7100-BK
230-11934
230-11239
370-0877
240-9499
270-2158
211-1674
120-11482
120-11482-RD
240-10190
230-10025
240-1159
150-9136K
300-9636
300-11961 Brackets, Caliper Mounting (pair, one each, left and right)
Spacer, .530 I.D. x 1.06 O.D. x .090 inch Thick
Spacer, .656 I.D. x 1.00 O.D. x .493 Long (use with disc brake spindle only)
Washer, .635 I.D. x 1.00 O.D. x .050 Thick (use with disc brake spindle only)
Shim, .510 I.D. x .750 O.D. x .015 Thick
Bolt, 1/2-20 x 2.75 Long, Hex Head
Washer, .515 I.D. x .875 O.D. x .063 Thick
Nut, 1/2-20, Hex
Bolt, 5/8 x 18 x 1.12 Long, FHCS
Bolt, 5/8 x 18 x 1.62 Long, FHCS (use with disc brake spindle only)
Stud, 1/2-20 x 1.75 Long, 12 Point
Hub Assembly
Cone, Inner Bearing
Seal, Grease
Adapter, Rotor
Rotor, .81” Thk x 11.00” Dia, 6 x 6.25” Bolt Circle
Rotor, Black, Drilled and Slotted (pair, one each, left and right)
Bolt, 5/16-18 x 0.75 Long, Torx Button Head
Bolt, 3/8-16 x 1.00 Long, Torx Button Head
Cone, Outer Bearing
Washer, Spindle
Cap, Dust
O-ring
Caliper, DynaPro
Caliper, DynaPro, Red
Washer, .391 I.D. x .625 O.D. x .063 Thick
Bolt, 3/8-24 x 1.25 Long, Hex Head
Shim, .035 inch Thick
Pad, BP-10, Axle Set
Pad Clip Retainer
Spacer, Wheel, .20 Thick
ITEM NO. PART NO. DESCRIPTION QTY
NOTES:
Part Number 230-3829 Bolt Kit, adapter plate to hub, includes part number 230-11239
Part Number 230-12121 Bolt Kit, rotor to adapter plate, includes part number 230-11934
Part Number 230-11861 Bolt Kit, caliper to bracket, includes part numbers 230-10025, 240-10190 and 240-1159
Part Number 230-10435 Bolt Kit, bracket to spindle, includes part numbers 230-10421, 230-10422. 230-10899, 240-0976, 240-1347, 240-7096,
240-11102, 230-0819 & 300-3415
Items 2A and 8A are to be used with Disc Brake Spindles.
Item 14A is an optional item and is included in the (D) drilled rotor kits. Add -D to end of part number when ordering.
Item 21A is an optional item and is included in the (R) red caliper kits. Add -R to end of part number when ordering.
Page 3