Moog Music Minimoog Voyager XL - Manual (Page 43)

Page 44
Voyager XL User’s Manual - The Components
Page 45
Voyager XL User’s Manual - The Components
M – Interface Panel
The Interface Panel provides a status display and controls for all of the Voyager XL software functions and
instrument settings.
The status display is an LCD screen located within the
Interface Panel. When the Voyager XL is first powered on,
the screen will display an ‘XL’ greeting message. The mes-
sage will stay on the screen for a few seconds, and then the
screen will display the active preset. This preset will be the
last preset in use when the Voyager was powered down.
The Voyager XL has three operating modes which are accessed on the Interface Panel:
PANEL: Used for accessing the Voyager XL presets and performance functions.
EDIT: Used for editing the parameters of a preset which are not accessed through the front panel
control knobs and switches. Naming and saving presets is done in EDIT mode.
MASTER: Used for accessing global settings for the Voyager, and data send and receive functions.
The LED’s located above the PANEL, EDIT and MASTER buttons will be lit when the respective operating
mode is selected. A MIDI LED located near the LCD screen will light whenever the Voyager receives an
incoming MIDI message on the correct MIDI channel.
Section Controls:
Panel:
Pressing the PANEL button places you in Panel Mode, where you select Voyager XL presets and basic per-
formance functions. For complete description of Panel Mode operations and functions, see page 43
.
Edit:
Pressing the EDIT button places you in Edit Mode, where you can edit menu-based preset parameters. For
a complete description of the Edit Mode operations and functions, see page 48.
Master:
Pressing the MASTER button places you in Master Mode, where you can access global settings, MIDI options
and operating system functions. For a complete description of the Master Mode operations and functions,
see page 63.
Enter:
The ENTER button is used to enter and store all changes (presets and global), and is occasionally used as
a navigation control in certain menus. In Panel Mode, pressing the ENTER button will advance to the next
preset within the currently selected sound category when categories are displayed on the LCD.
Cursor:
The CURSOR button is used to navigate the display and make menu selections.
-1/+1:
The -1/+1 buttons are used to select presets in Panel Mode, and choose functions and select parameter
values in Panel, Edit and Master modes.