Moog Music Voyager Old School - Manual (Page 36)

Page 38
Voyager OS User’s Manual - Appendices
Page 39
Voyager OS User’s Manual - Appendices
SECTION PARAMETER EFFECTIVE
RANGE
TOUCH
(Note 1)
X N/A
Y N/A
A N/A
GATE N/A
KBD
PITCH (Note 2) -0.916V to 2.667V Nominal
VEL -5 to + 5V
PRESS -5 to + 5V
GATE +5V ON, 0V OFF
WHEELS
PITCH -5 to +5V
MOD -5 to +5V
PEDALS
MOD1 (Note 3) -5 to +5V
MOD2 (Note 3) -5 to +5V
LFO
TRIANGLE +/- 2.5V
SQUARE +3V
BUSSES
WHEEL (Note 4) -4 to +4V Nominal
PEDAL (Note 5) -4 to +4V Nominal
ENVS
FILTER 0 - 5V
VOLUME 0 - 5V
S&H
STEP -2 to +2V Nominal
SMOOTH -2 to +2V Nominal
NOISE NOISE +/- 1V Nominal
The table below shows the effective ranges of the VX-351 Outputs.
Note 1: The Touch Surface jacks are non-functional when the VX-351 is used with the Voyager OS.
Note 2: The range shown is the Keyboard Pitch voltage range over the Voyager’s 31⁄2 octave key-
board (F-C). Keyboard Pitch is scaled for 1 V/octave.
Note 3: The MOD1 and MOD2 outputs default to +5V if nothing is connected to the MOD1 and
MOD2 inputs.
Note 4: The jack labeled “WHEEL” outputs the signal from the Voyager OS Mod Bus 1.
Note 5: The jack labeled “PEDAL” outputs the signal from the Voyager OS Mod Bus 2.
VX-351 CV Expander Outputs