Moog Music MF-105M MIDI MuRF (Manual Addendum - Firmware v1.8) - Manual (Page 34)

Appendix D: MF-105M SPECIFICATIONS
DESCRIPTION:
Analog effects module incorporating two functions: 8 – band Resonant
Filter Bank and 24-Pattern Sequencer triggering Volume Envelopes for 8
Filters with CV and MIDI control.
FRONT PANEL FEATURES:
DRIVE rotary control - adjusts the gain of the audio input to the effect.
OUTPUT rotary control - balances the level of MuRF’s signal when the
effect is on with the bypassed signal when the effect is off.
MIX rotary control - adjusts the ratio of direct to effected signal when the
effect is on.
200 Hz – 3.4 Hz slider controls - sets the gain of the 8 resonant filters.
PATTERN 12-position rotary switch - selects one of 12 animation
patterns in the BASS or MIDS bank.
LFO slider switch – turns on and off the LFO that shifts all 8 filters’
frequencies
FREQ slider switch – changes the voicing of all 8 filters to BASS or
MID frequency range. Also changes bank of patterns.
ENVELOPE rotary control - morphs the shape of the patterns’ envelopes.
RATE rotary control - adjusts the rate of the animation patterns
DRIVE, a three-color LED that shows the level of the input signal.
RATE, a LED that indicates the animation pattern rate as well as MIDI
status.
BYPASS, a two-color indicator LED that tells whether the effect is active
or bypassed.
ON/BYPASS, a rugged, smooth-acting ‘stomp switch’.
JACK PANEL FEATURES:
AUDIO IN 1⁄4" phone jack – accepts any instrument-level or line-level
signal from –16 dBm to +4 dBm. Input impedance is one megohm.
LEFT/MONO OUT 1⁄4" phone jack - -4 dBm nominal maximum output
level; +8dBm absolute maximum output level. Output impedance is
1,000 ohms.
RIGHT OUT 1⁄4" phone jack – 4 dBm nominal maximum output level; +8
dBm absolute maximum output level. Output impedance is 1,000 ohms.