Moog Music MF-103 12-Stage Phaser - Manual (Page 11)

Rotating Speaker:
Feed the AUDIO output to one speaker and the AUX output to another speaker
for this rotating speaker simulation. Plug your expression pedal into the RATE
control input to use your foot to simulate slowing down and speeding up the
rotation. Press the pedal about one third down to simulate fast Leslie®.
RATE = 1
AMOUNT = 3
SWEEP = 3
RESONANCE = 6 – 8
Left Switch = HI
Right Switch = 6-STAGE
Phase-Wah:
Instead of letting the LFO sweep the phase, try plugging your expression pedal
into the SWEEP jack. Then you can move the phaser frequency response back
and forth in time with your music. The sweep effect is more noticeable as
RESONANCE is increased.
RATE = doesn’t matter
AMOUNT = 0
SWEEP = 0 – 4
RESONANCE = 0 – 10
Left Switch = doesn’t matter
Right Switch = 6-STAGE or 12-STAGE
RingMod Effect:
In this setup, we’re fast-modulating the phaser, thereby producing ring-
modulator-like sounds. We’ll put the pedal in the AMOUNT jack , and use it to
bring the effect in and out. We’ll probably hear some of the LFO itself coming
through, but that’s just part of the effect. This works particularly well on drum
loops or rhythmic patterns.
RATE = 250
AMOUNT = 0
SWEEP = 5
RESONANCE = 6 – 10
Left Switch = HI
Right Switch = Either 6-STAGE or 12-STAGE
Don’t forget to plug your pedal into the AMOUNT jack.