Moog Music Animoog for iPhone - Manual (Page 6)

SELECTING PRESETS AND SETTING TEmPO
PRESET SELECTOR
Touch the PRESET menu to open it, then select a preset from a wide variety of
categories. Press and hold SAVE to save changes to a preset, or to create a new
preset.
bPm/TAP TEmPO
Touch and drag up or down on the BPM indicator to increase or reduce the
BPM. Tapping the
TAP button initiates tap tempo.
KEY SPACING
The KEY SPACING CONTROL shifts the keyboard to display lower or higher
notes in a scale. It also permits stretching or shrinking the number of keys dis-
played. To shift the keys, press and drag the center of the control. To increase
or decrease the number of keys displayed, press and drag the end tab.
mOD STRIPS
mOD and PITCH strips are assignable in the mOD section and can be toggled
On/Off in the
SETUP page.
VOL, COR, AND GLIDE CONTROLS
The VOL (volume) knob sets Animoog’s overall volume. The COR (correction)
knob sets pitch correction between keys. At 10, no correction occurs. At 5,
rocking your finger side to side will allow for vibrato and pitch bend effects. At
0, there is no pitch correction between keys and Animoog’s keys function as a
ribbon controller. The
GLIDE knob adjusts portamento time (the time it takes
for pitch to slide from note to note.)
HOLD bUTTON
The HOLD button will sustain a note indefinitely. Up to four notes can be played
simultaneously, after which the oldest voice is replaced by each new note.