TC Electronic Broadcast 6000 - Manual (Page 203)

VP-2 Stereo
English Manual 199
VP-2 Stereo
The VP-2 Stereo algorithm occupies:
– @ Normal Sample Rate: 1/4 DSP Resource
– @ Double Sample Rate: Not available
The inputs and outputs of this algorithm are dis-
tributed as follows:
Input Output
L
E1
E2
E3
E4
L
R R
VP-2 Stereo algorithm – main page
VP-2 Stereo algorithm – main page
Operation
Pitch mode
Range: Stereo Linked or Dual
Stereo Linked
In this mode the parameters for left and right
channels are linked and phase-locked and
changes of any parameter via Faders 1 and 2
will be performed on both channels.
Dual
In Dual mode various parameters are available
for both left and right channel. As the processing
is completely independent for the two channels,
this processing can be conceived as a Dual Pitch
Brain mode.
Input Levels
InLevel L/InLevel R
Range: -100 to 0 dB
Sets the Input level for left and right channel.
Output Levels
Wet Level L/ Wet Level R
Range: -100 to 0 dB
Sets the” Wet” Output level for left and right
channel.
Dry Level L/ Dry Level R
Range: -100 dB to 0 dB
Sets the “Dry” Output level for left and right
channel.
VP-2 Stereo algorithm – pitch page
VP-2 Stereo algorithm – pitch page
Pitch
Pitch L/ Pitch R
Range: ±1200 Cent or ±100 %
Use this parameter to specify the transpose
value.
Pitch Unit
Chose whether the transpose amount should be
displayed in cent, % or semitones.