Sena Bluetooth SPH10H-FM v4.3 User's Guide - Manual (Page 25)

SPH10H-FM
24
13. TWO-WAY INTERCOM
13.1 Start and End Two-way Intercom
1. You can start an intercom conversation with one
of any intercom friends by tapping the Jog Dial:
single tapping to intercom with the first intercom
friend, double tapping with the second intercom
friend, and triple tapping with the third intercom
friend.
Start Two-way Intercom Conversation
2 nd Intercom
Friend
1 st Intercom
Friend
3 rd Intercom
Friend
6. If you want to exit the speed dial immediately,
rotate the Jog Dial until you hear a voice prompt
saying “Cancel”, and tap the Phone Button or the
Jog Dial. If any button is not pressed within 15
seconds, the SPH10H-FM will exit the voice speed
dial menu and goes back to stand-by mode.
Note:
Make sure that you should connect the mobile phone and
the headset in order to use the speed dial function.
Answer Tap Phone Button or Tap Jog Dial or Say
“Hello”
End Tap Phone Button or Press Jog Dial
for 2”
Reject Press Jog Dial for 2”
Transfer Press Phone Button for 2”
Call Use phone keypad
Speed Dial Double tap Phone Button
Voice Command Tap Phone Button
Mobile Phone Call Button Operations