GE P&W Mobile Water Treatment Systems - Mobile Combination Unit User Manual

Mobile combination unit, Description and use, General properties

Advertising
background image

Fact Sheet

Find a contact near you by visiting www.ge.com/water and clicking on “Contact Us”.

* Trademark of General Electric Company; may be registered in one or more countries.

©2010, General Electric Company. All rights reserved.

FS1053EN.doc Jul-10

Mobile Combination Unit

Prefiltration/RO/Polishing Unit for "Low Flow" Applications

Description and Use

GE Mobile Combination Unit provides prefiltration
(multi-media), Reverse Osmosis (RO), and optional
mixed bed polishing all in an ISO Container. The
units are designed to produce water at flow rates
up to 200 GPM (45 m

3

/hr.) in single pass mode and

up to 100 GPM (23 m

3

/hr.) in double pass mode. The

unit is capable of producing mixed bed quality wa-
ter when using the optional mixed bed

de-ionization, a plug in silica analyzer and inlet
pressure control valve.

General Properties

Features
• Up to 200 GPM (45 m

3

/hr) in single pass

mode and up to 100 GPM (23 m

3

/hr.) in double

pass mode.

• Unit can be mounted on mobile chassis or off-

loaded to operate on ground level

• Able to combine with other GE Mobile units to

enhance system capability

• Rejection rates of 95 - 99%
• Removes not only dissolved ions, but also bacte-

ria, pyrogens, organics, particles, colloids, color
and oxidizing agents at up to 99.9%

• Canadian Standards Assoc. (CSA) approved elec-

tricals and controls

• Two multi-media filtration vessels (anthracite,

garnet, sand)

• Cartridge filters
• Five chemical injects with two inline static mixers
• Mixed-bed polishing vessels as needed (internally

or externally mounted)

Table1: Unit Specifications

Advertising