GE P&W PRO EU Series - Manual

Fact Sheet
Find a contact near you by visiting www.gewater.com and clicking on “Contact Us”.
* Trademark of General Electric Company; may be registered in one or more countries.
©2013, General Electric Company. All rights reserved.
E-FSpwPRO_EU_Series_Hu_EN.doc Oct-13
PRO EU Series
Reverse Osmosis Machines from 8 to 112 m 3 /h
Features
 Configurable skid mounted RO system for
industrial brackish water demineralization
 Control Cabinet with Siemens S7- 1200 PLC
and TP 277 touchscreen
 Ethernet Communication
 Motor starter mounted and wired
 4-20 mA Instruments displayed locally on
instruments and/or on touchscreen
 100% permeate flush on shut down using CIP
tank
 High pressure pump & cartridge filter housings
mounted on skid
Instrumentation
Flow Meters transmitters Permeate, Concentrate
Conductivity transmitters Feed, Permeate
Temperature transmitter Permeate
Pressure transmitters After HPPump throttling valve
Prior to concentrate valve
pH/ORP control system (optional) Feed
Pressure indicator/switches: Pre & Post Cartridge Filter
HPPump discharge, post HPPump throttling valve,
Pre/post concentrate orifice, permeate line, Interstage
Configurations
 Controls configuration:
 PLC and HMI
 I/O box
 Membrane Options:
 Low Energy Elements
 Standard brackish water elements
 High rejection Elements
 Banking configuration:
 2-Banks (high rejection design)
 3 banks (high recovery design)
 High pressure pump motor control options:
 Motor Starter
 Variable Frequency Drive
 Optional pH/ORP meter (feed)
PRO EU Accessories
 PRO Multi-Media filters
 PRO Activated Carbon and Softeners
 PRO Clean-in-Place units
 PRO Chemical Feed Systems
 Transfer Pumps and Storage Tanks
Operating Parameters
Design Recovery 1 70%-85%
Design Temperature 15ºC
Operating Temperature Range 5-30 ºC
Nominal rejection 97-99%
System Inlet Pressure 2–4 bar
1 Recovery Rate can vary +/- 5%