S&B Filters Cold Air Intake Kit - Cotton Filter 75-3013-2 - Manual

4/23/2007
(909) 947-0015 Phone - (909) 947-0603 Fax
www.sbfilters.com
High Performance High Performance
Cool Air Intake Kit Cool Air Intake Kit
INSTALLATION INSTRUCTIONS
(Over)
75-3013-2
CHEVROLET / GMC
C/K Pickup V8-5.0L
C/K Pickup V8-5.7L
Suburban V8-5.7L
Tahoe V8-5.7L
Yukon V8-5.7L
Qty Parts List Qty Parts List
2 4” - 2” Adapter 1 Ring Gasket
1 3.5” - 4” x 3” 4 10-24 Screws
1 3.5” x 2” Adapter 3 M6 Cap Head Screws
1 Intake Tube 8 #10 Washers
1 Intake Box 4 10-24 Nylock Nuts
1 Intake Lid 1 1/2” Grommet
1 CARB Sticker 2 1/4” Washers
2 #60 Hose Clamps 4 #10 Sealing Washers
4 #64 Hose Clamps 4 SS Pan Head Screws
1 Steel Ring Adapter 1 Air Filter
Tools Required
Screwdriver
Ratchet
5mm Allen wrench
1/8” Allen wrench
3/8” Socket
7/16” Socket
7/32” Socket
13mm Socket
5/16” Wrench
7/16” Wrench
1. Disconnect battery and remove “T” nut.
2. Disconnect vent hose from intake tube.
3. Loosen hose clamp on mass air sensor
4. Lift and remove tube.
5. Disconnect mass air sensor.
9. Remove stud.
6. Disconnect air temperature sensor.
10. Remove the bolt from the stand off using a
7/32” wrench. Take lower portion of the bolt
and reinstall in throttle body. Thus, you have
just lowered the position of the bolt.
7. Pull air box towards engine, up and out.
11. Install coupling nuts.
8. Remove bracket by removing bolt from
inside fender well.
12. Install gasket.