SOLO 433 Hochdruckspritze - Manual (Page 23)

Safety regulations
ENGLISH 5
2.3 Safe handling of spray pesticides
x Pesticides must never be allowed to enter public sewer systems, sprayed onto wastelands, allowed to
drain into natural bodies of water or disposed of together with normal domestic waste. This also means
that appropriate care must be taken during filling to ensure that none of the pesticide is drawn back
into water pipes. Pesticides and any unused leftovers of pesticides must always be collected in a
suitable container and disposed of via approved facilities for household chemical waste. Please
contact your local authorities for information about your nearest disposal facilities.
x Avoid any direct contact with pesticides.
x Stop working immediately if you start to feel unwell while working, or if you become unusually tired.
Seek medical advice if the condition persists.
x Never allow children or anybody who is not familiar with handling this type of spraying agent to handle
the spraying agent.
x Clean the solution tank whenever the spraying agent is changed. Run the backpack sprayer with clear
water after cleaning the solution tank – but before the next spraying agent is filled – flush out any
residue from the pump and the hoses. This will prevent the risk of any chemical reactions taking place
between the different substances.
x Never spray in narrow or enclosed spaces – pesticides are toxic and there is a risk of poisoning.
Spraying equipment must for example only be used in greenhouses if adequate ventilation is provided.
Signs must be put up in greenhouses that have been treated. Nobody should enter the greenhouse
again until it has been thoroughly ventilated.
x When you have finished spraying, follow the steps in section 13.4 "Draining and cleaning the solution
tank" to prepare the device for storage, thoroughly wash your face and hands with soap, take off your
work clothing and ensure that it is washed regularly.
Any unused pesticide that is left over in the device could cause corrosion and hence damage the
device. Special attention must be paid to wearing parts like nozzles, filters and seals.
2.4 Working clothes
Always wear appropriate clothing and protective equipment whenever this power tool is used.
x Wear appropriate protective clothing which covers all body parts. This includes gloves, head
protection, foot protection, body protection and possibly an apron or breathing mask. Clothing should
suitable, i.e. tight without being obstructive. Do not wear a scarf, necktie, jewellery or any clothing
which can get caught on shrubs or branches.
x Wear firm shoes with good traction, preferably safety shoes.
Wear protective gloves with non-slip grip.
Use personal ear protection (such as ear muffs, ear plugs or similar) and a face mask or safety
goggles to protect against spray drift or airborne debris.
When using spray medium that can be hazardous to health, wear a breathing mask to prevent
poisoning.
x Any clothing soaked with chemical or petrol should be changed immediately.
Always observe accident prevention regulations issued by local trade organizations or workers
compensation boards.
2.5 Transporting the sprayer
x Always stop the engine to transport the sprayer.
x Considering road traffic hazards it is advisable to secure the sprayer firmly and safely before
transporting the unit.
x Ensure there are no chemical or petrol leaks. Always check the chemical tank, pump, fuel tank and all
hoses and pipes for the chemical solution and fuel supply for leakage. Prior to transporting the sprayer,
drain the chemical tank as per instructions provided in section 13.4 "Draining and cleaning chemical
tank".