SENA Parani100 - Manual (Page 55)

- 55 - 55
A .6 Commands for Bluetooth Configuration
BTNAME <name>
: BTNAME command audits or revises Parani100Device Names detectable
by other Bluetooth devices.
Default BTNAME displays current value.
Ex.: BTNAME My Parani100
+OK
BTNAME
+OK My Parani100
PIN <pin-code>
: PIN command revises the Bluetooth PIN code. Max.: 16 bytes, ASCII
code only.
Ex.: PIN 1234
+OK
SECU <low|high>
: SECU command revises the security level. Low obtains no security; High
obtains Enabling Security. Default SECU displays current security level.
Ex.: SECU high
+OK
SECU
+OK high
PAIR <on|off>
: For Pairing mode enable/disable. In High security levels, when Paring
mode is set to off, only Bluetooth devices sharing Link Key (see LKEY
command) connect with Parani100 (non-pairable mode)
Ex.: PAIR off
+OK
PAIR
+OK off
LKEY
: For auditing currently paired Bluetooth devices sharing Parani100.
LinkKey.