Q-Tech QT78HCD - Manual

AMSC N/A FSC 5955
INCH-POUND
MIL-PRF-55310/27D
15 October 2008
SUPERSEDING
MIL-PRF-55310/27C
09 June 2008
PERFORMANCE SPECIFICATION SHEET
OSCILLATOR, CRYSTAL CONTROLLED, TYPE 1 (CRYSTAL OSCILLATOR (XO)),
1.0 MHz THROUGH 85 MHz, HERMETIC SEAL, SQUARE WAVE, HIGH SPEED CMOS
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The requirements for acquiring the product described herein
shall consist of this specification sheet and
MIL-PRF-55310 .
NOTES:
1. Dimensions are in inches.
2. Metric equivalents are given for general information only.
3. Unless otherwise specified, tolerances are ±.005 (0.13 mm) for three place decimals and ±.02 (0.5 mm) for two
place decimals.
FIGURE 1. Dimensions and configuration.
Pin number Function
1 Enable/disable
2 GND
3 Output
4 B+
Inches mm Ltr
Min Max Min Max
A N/A .560 N/A 14.22
B N/A .360 N/A 9.14
C .195 .205 4.95 5.21
D .086 .114 2.18 2.90
E .025 .055 .635 1.40
F N/A .378 N/A 9.60
G .292 .308 7.42 7.82
H .007 .009 .178 .229
J N/A .188 N/A 4.78
K .015 .021 .381 .533