Connections, Modem connection – Asus VX2 User Manual

Page 55

Advertising
background image



Using the Notebook PC

4

NOTE: The built-in modem and network cannot be installed later as an upgrade. After

purchase, modem and/or network can be installed as an expansion card.

CAUTION: For electrical safety concerns, only use telephone cables rated 26AWG or

higher. (see Glossary for more information)

NOTE: When you are connected to an online service, do not place the Notebook PC

in suspend (or sleep mode) or else you will disconnect the modem connection.

Connections

Example of the Notebook PC connected to a telephone jack for use with the built-in modem:

Modem Connection

The telephone wire used to connect the Notebook PC’s internal modem should have

either two or four wires (only two wires (telephone line #1) is used by the modem) and

should have an RJ-11 connector on both ends. Connect one end to the modem port and

the other end to an analog telephone wall socket (the ones found in residential buildings).

Once the driver is setup, the modem is ready to use.

Telephone Wall

Jack

Telephone cables

with RJ-11 connectors

Telephone

connection is

optional

Telephone connector

is the smaller of the two�

Advertising