Asus P6T7 WS SuperComputer - Manual (Page 84)

3-18 Chapter 3: BIOS setup
The following fourteen (14) items are adjusted by typing the desired values
using the numeric keypad and press the <Enter> key. You can also use the <+>
and <-> keys to adjust the value. To restore the default setting, type [auto] using
the keyboard and press the <Enter> key.
3.4.7 CPU Voltage [Auto]
Allows you to set the CPU VCore voltage. The values range from 0.85000V to
2.10000V* with a 0.00625V interval.
• Refer to the CPU documentation before setting the CPU Vcore voltage.
Setting a high VCore voltage may damage the CPU permanently, and
setting a low VCore voltage may make the system unstable.
• The value [2.10000V] of the CPU Voltage item is supported only if the
OV_CPU jumper is enabled. Otherwise the maximum voltage supported
is [1.70000V]. Refer to 2. CPU / DRAM Bus / QPI DRAM overvoltage
setting on page 2-21 for details.
3.4.8 CPU PLL Voltage [Auto]
Allows you to set the CPU PLL voltage. The values range from 1.80V to 2.50V with
a 0.02V interval.
3.4.9 QPI/DRAM Core Voltage [Auto]
Allows you to set the QPI/DRAM Core voltage. The values range from 1.20000V to
1.90000V* with a 0.00625V interval.
The value [1.90000V] of the QPI/DRAM Core Voltage item is supported
only if the OV_QPI_DRAM jumper is enabled. Otherwise the maximum
voltage supported is [1.70000V]. Refer to 2. CPU / DRAM Bus / QPI DRAM
overvoltage setting on page 2-21 for details.
3.4.10 IOH Voltage [Auto]
Allows you to set the I/O Hub (IOH) voltage. The values range from 1.10V to 1.70V
with a 0.02V interval.
3.4.11 IOH PCIE Voltage [Auto]
Allows you to set the IOH PCIE voltage. The values range from 1.50V to 2.76V
with a 0.02V interval.
3.4.12 ICH Voltage [Auto]
Allows you to set the I/O Controller Hub (ICH) voltage. The values range from
1.10V to 1.40V with a 0.10V interval.