Asus P5P43TD/USB3 - Manual (Page 53)

ASUS P5P43TD 2-15
The following item appears only when you installed an Intel ® CPU that supports the
Enhanced Intel ® SpeedStep ® Technology (EIST).
Intel(R) SpeedStep(TM) Tech [Enabled]
Allows you to use the Enhanced Intel ® SpeedStep ® Technology. When set to [Enabled], you
can adjust the system power settings in the operating system to use the EIST feature. Set
this item to [Disabled] if you do not want to use the EIST. Configuration options: [Enabled]
[Disabled]
2.5.2 Chipset
The Chipset menu allows you to change the advanced chipset settings. Select an item then
press <Enter> to display the submenu.
North Bridge Configuration
Memory Remap Feature [Enabled]
Allows you to enabled or disable the remapping of the overlapped PCI memory above the
total physical memory. Enable this option only when you install 64-bit operating system.
Configuration options: [Disabled] [Enabled]
Initiate Graphic Adapter [PEG/PCI]
Allows you to decide which graphics controller to use as the primary boot device.
Configuration options: [PCI/PEG] [PEG/PCI]
2.5.3 Onboard Devices Configuration
High Definition Audio [Enabled]
Allows you to enable or disable the high definition audio.
Configuration options: [Enabled] [Disabled]
Front Panel Type [HD Audio]
Allows you to select the front panel type. If High Definition Audio Front Panel used,
please set HD Audio mode. Configuration options: [AC97] [HD Audio]
JMB368 IDE [Enabled]
Allows you to enable or disable the JMB368 IDE controller.
Configuration options: [Disabled] [Enabled]
JMB368 IDE BOOTROM [Enabled]
Allows you to enable or disable the JMB368 IDE Boot ROM. This item appears only
when the JMB368 IDE item is set to Enabled.
Configuration options: [Disabled] [Enabled]
Onboard PCIE GbE LAN [Enabled]
Allows you to enable or disable the onboard LAN controller.
Configuration options: [Enabled] [Disabled]