Asus P5G41T-M LX2 - Manual (Page 37)

2-12 Chapter 2: BIOS information
2.5.5 Hardware Monitor
CPU Temperature [xxxºC/xxxºF] or [Ignored]
MB Temperature [xxxºC/xxxºF] or [Ignored]
The onboard hardware monitor automatically detects and displays the motherboard and CPU
temperatures. Select [Ignored] if you do not want the detected temperatures to be displayed.
CPU/Chassis Fan Speed [N/A], [xxxxRPM], or [Ignored]
The onboard hardware monitor automatically detects and displays the CPU/chassis fan
speed in rotations per minute (RPM). If the fan is not connected to the motherboard, the field
shows [N/A]. Select [Ignored] if you do not want the detected speed to be displayed.
VCORE Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage [xxxV] or [Ignored]
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators.
CPU Q-Fan Function [Disabled]
Enables or disables the CPU Q-Fan function. Configuration options: [Disabled] [Enabled]
2.5.4 APM Configuration
Restore on AC Power Loss [Power Off]
When this item is set to [Power Off], the system goes into OFF state after an AC power loss.
When this item is set to [Power On], the system goes into ON state after an AC power loss.
When this item is set to [Last State], the system goes into either OFF or ON state, whatever
the system state was before the AC power loss. Configuration options: [Power Off]
[Power On] [Last State]
Power On By RTC Alarm [Disabled]
Enables or disables RTC to generate a wake event. When this item is set to [Enabled], the
items RTC Alarm Date, RTC Alarm Hour, RTC Alarm Minute, and RTC Alarm Second appear
with set values. Configuration options: [Disabled] [Enabled]
Power On By External Modem [Disabled]
Enables or disables RI to generate a wake event. Configuration options: [Disabled] [Enabled]
Power On by PCI(E) Device [Disabled]
Enables or disables a PCI/PCIe device to generate a wake event. This feature requires an
ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]
Power On By PS/2 Keyboard [Disabled]
Enables or disables the PS/2 keyboard to generate a wake event. This feature requires an
ATX power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Space Bar] [Power Key] [Ctrl-Esc]
Power On By PS/2 Mouse [Disabled]
Enables or disables the PS/2 mouse to generate a wake event. This feature requires an ATX
power supply that provides at least 1A on the +5VSB lead.
Configuration options: [Disabled] [Enabled]