Asus Z87-A - Manual (Page 86)

2-36 ASUS Z87-A
CPU Fan Min. Duty Cycle(%) [20]
Use the <+> or <-> keys to adjust the minimum CPU fan duty cycle. The values range
from 0% to 100%. When the CPU temperature is under 40ºC, the CPU fan will operate
at the minimum duty cycle.
2.7.5 Chassis Q-Fan Control 1/3 [Enabled]
[Disabled] Disables the Chassis Q-Fan control feature.
[Enabled] Enables the Chassis Q-Fan control feature.
Chassis Fan Speed Low Limit 1/3 [600 RPM]
This item appears only when you enable the Chassis Q-Fan Control feature and allows you
to disable or set the chassis fan warning speed.
Configuration options: [Ignore] [2�� RP�] [��� RP�] [4�� RP�] [5�� RP�] [6�� RP�]
Chassis Fan 1/3 Profile [Standard]
This item appears only when you enable the Chassis Q-Fan Control feature. It allows
you to set the appropriate performance level of the chassis fan.
[Standard] Set to make the chassis fan adjust automatically depending on the
chassis temperature.
[Silent] Set to minimize the fan speed for quiet chassis fan operation.
[Turbo] Set to achieve maximum chassis fan speed.
[Manual] Set to assign detailed fan speed control parameters.
The following items appear only when you set the Chassis Fan Profile to [Manual].
Chassis Upper Temperature 1/4 [70]
Use the <+> or <-> keys to adjust the upper limit of the CPU temperature.
The values range from 40ºC to 90ºC.
Chassis Fan Max. Duty Cycle(%) 1/4 [100]
Use the <+> or <-> keys to adjust the maximum chassis fan duty cycle. The
values range from 20% to 100%. When the chassis temperature reaches
the upper limit, the chassis fan will operate at the maximum duty cycle.
Chassis Lower Temperature 1/4 [40]
Displays the lower limit of the chassis temperature.
CPU Fan Min. Duty Cycle(%) 1/4 [60]
Use the <+> or <-> keys to adjust the minimum chassis fan duty cycle. The
values range from 0% to 100%. When the chassis temperature is under
40ºC, the chassis fan will operate at the minimum duty cycle.
2.7.6 Anti Surge Support [Enabled]
This item allows you to enable or disable the Anti Surge function.
Configuration options: [Disabled] [�nabled]