Asus M2V-MX SE - Manual (Page 73)

ASUS M2V-MX SE 2-31
2.5.4 APM Configuration
APM Configuration
Power Management/APM [Enabled]
Restore on AC Power Loss [Power Off]
Advanced Resume Events Controls
Power On By Ring [Disabled]
Power On By Lan [Disabled]
Power On by PME [Disabled]
Power On By KBC [Disabled]
Wake-Up Key [Any Key]
Power On By PS/2 Mouse [Disabled]
Power On By RTC Alarm [Disabled]
Power Management/APM [Enabled]
Allows you to enable or disable the Advanced Power Management (APM) feature.
Configuration options: [Disabled] [Enabled]
Restore on AC Power Loss [Power Off ]
When set to Power Off, the system goes into off state after an AC power loss.
When set to Power On, the system goes on after an AC power loss. When set to
Last State, the system goes into either off or on state whatever the system state
before the AC power loss.
Configuration options: [Power Off] [Power On] [Last State]
Power On By Ring [Disabled]
This allows either settings of [Enabled] or [Disabled] for powering up the computer
when the external modem receives a call while the computer is in Soft-off mode.
Configuration options: [Disabled] [Enabled]
The computer cannot receive or transmit data until the computer and
applications are fully running. Thus, connection cannot be made on the first
try. Turning an external modem off and then back on while the computer is off
causes an initialization string that turns the system power on.
Power On By LAN [Disabled]
When set to [Enabled], this parameter allows you to turn on the system through a
PCI LAN or modem card. This feature requires an ATX power supply that provides
at least 1A on the +5VSB lead. Configuration options: [Disabled] [Enabled]