Armasight NAMPVS7001G7DA2 PVS7 GEN 3 Ghost MG TAN Night vision goggles - Manual (Page 15)

15
C. Automatic Shutoff. When the goggles are removed from the head mount or helmet mount while
in on and in use, they will automatically shut off. This prevents detection by other NVDs by eliminating
the green glow of the image intensifier. To turn the goggles back on, flip the switch to RESET/ OFF and
then back to ON again.
D. High Light Cutoff. The goggles will automatically shut off after 70 (±30) seconds of operation in
daylight or bright room light. Individual bright lights (headlights, flashlights or other concentrated
light sources) will not activate the high light cutoff function, unless the light is focused directly onto
the high light detector located on the front of the goggles. To turn the goggles back on, flip the switch
to RESET/ OFF and then back to ON again.
2.1.3 CONSUMABLE ITEMS
Items listed in Table 2-8 are recommended for operator maintenance.
TABLE 2-8. CONSUMABLE ITEMS
ITEM LIMITS
Lens Paper -
Color Swabs -
Alcohol -