Display brightness button, Diopter controls – Armasight TFT238MN6TS32RP FLIR Scout TS32R Pro 320x240 65mm monocular 8.3Hz, PAL User Manual
Page 22

3—Operating Your Scout Camera
Scout Operator’s Manual
18
June 2011
Display Brightness Button
Use this button to cycle through the five levels of display
brightness. Each press of the button advances to the next
level of brightness.
When the highest brightness level is reached, subsequent button
presses advance to the next lower brightness levels. When the lowest
brightness level is reached, subsequent button presses advance to
the next higher brightness levels. One of the following icons is
displayed for approximately 3 seconds after the button is pressed
indicating the current brightness level:
Diopter Controls
The diopter adjustment lever allows a ±2 diopter setting range. When
the diopter adjustment lever is pointing straight away from the
camera, it is in the neutral position.
Adjust the diopter setting for the sharpest image in the viewfinder.
Highest
Lowest
- TFT227MN9TS24PR FLIR Scout TS24 Pro 240x180 monocular 7.5Hz, NTSC TFT237MN9TS3200 FLIR Scout TS32 320x240 monocular 7.5Hz, NTSC TFT237MN9TS32PR FLIR Scout TS32 Pro 320x240 monocular 7.5Hz, NTSC TFT237MN6TS32R0 FLIR Scout TS32R 320x240 65mm monocular 7.5Hz, NTSC TFT237MN6TS32RP FLIR Scout TS32R Pro 320x240 65mm monocular 7.5Hz, NTSC TFT227MN9TS2400 FLIR Scout TS24 240x180 monocular 8.3Hz, PAL TFT228MN9TS24PR FLIR Scout TS24 Pro 240x180 monocular 8.3Hz, PAL TFT238MN9TS3200 FLIR Scout TS32 320x240 monocular 8.3Hz, PAL TFT238MN9TS32PR FLIR Scout TS32 Pro 320x240 monocular 8.3Hz, PAL TFT238MN6TS32R0 FLIR Scout TS32R 320x240 65mm monocular 8.3Hz, PAL