AVSL 153.770 ILA2 - Manual (Page 5)

ILW2
IN-LINE WIRELESS CONTROLLER
FOR SINGLE COLOUR LED TAPE
Item ref: 153.698UK
User Manual
WARNING: This product is intended for professional
installation of single colour LED tape and should be connected
by qualified personnel in accordance with electrical safety
standards. Ensure that the rated load indicated is not
exceeded.
Installation
The ILW2 controller can be employed to control Fluxia single colour LED tape operating from a 5-24Vdc
power supply. Maximum short term current load is rated at 12A. For constant full power output, it is
advised to limit this to 6A load.
For Fluxia single colour LED tape (153.705-153.718UK), it is recommended to connect no more than 3 x
5m tapes radially from the same controller. When connecting 5m tapes to make a longer run (up to 15m),
it is advised to use bypass wiring instead of connecting end-to-end to avoid noticeable voltage drop at the
furthest end from the power supply. Examples are shown below.