Acer D241H - Manual (Page 14)

EN-13
1
Empowering:
Press the Empowering Key to open the Acer eColor Management OSD and access
the scenario modes.
2
AUTO
Auto Adjust
Press this button to activate the Auto Adjustment function. The Auto Adjustment
function is used to set the HPos, VPos, Clock and Focus.
3
MENU
OSD functions
Press this botton to activate the OSD menu.
4
Volume Up / Down
Press to adjust volume (Only Audio-Input Model)(Optional)
5
INPUT
Input Key (PC Mode)
Use Input key to select from different video sources that may be connected to
your monitor.
(a) VGA input (b) HDMI input
As you cycle through the sources you will see the following messages on top right
side of screen to indicate currently selected input source. It may take 1 or 2
seconds for the image to appear.
VGA or HDMI
If either VGA or HDMI input is selected ,but the VGA and HDMI cables are not
connected, a floating dialog box indicates:
”
Cable Not Connected”
When the video cable is connected, but there is no active signal input, a floating
dialog box in indicates:
”No Signal”
6
Source Key
Use Source Key to select PC Mode or Plus Mode.