Xylem A-C Fire Pump – Vertical Turbine Fire Pump AC8499 - Manual (Page 3)

3
FOREWORD
This manual provides instructions for the Installation, Opera-
tion, and Maintenance of the A-C Fire Pumps. This manual
covers a standard product. For special options, supplemental
instructions are available. This manual must be read and
understood before installation and start-up.
This instruction manual covers several different pump models.
Most assembly, disassembly, and inspection procedures are
the same for all the pumps. However, where there are differ-
ences, these differences will be noted within the manual. The
design, materials, and workmanship incorporated in the con-
struction of the A-C Fire Pumps makes them capable of giving
long, trouble-free service. The life and satisfactory service of
any mechanical unit, however, is enhanced and extended by
correct application, proper installation, periodic inspection,
condition monitoring and careful maintenance. This instruction
manual was prepared to assist operators in understanding the
construction and the correct methods of installing, operating,
and maintaining these pumps.
The information contained in this book is intended to assist
operating personnel by providing information on the charac-
teristics of the purchased equipment. It does not relieve the
user of their responsibility of using accepted engineering
practices in the installation, operation, and maintenance of
this equipment.
A-C Fire Pumps shall not be liable for physical injury,
damage, or delays caused by a failure to observe the
instructions for installation, operation, and maintenance
contained in this manual.
Warranty is valid only when genuine A-C Fire Pumps parts
are used.
Use of the equipment on a service other than stated in the
order will nullify the warranty, unless written approval is
obtained in advance from A-C Fire Pumps.
For information or questions not covered in this manual, con-
tact A-C Fire Pump Systems at (847) 966-3700.
THIS MANUAL EXPLAINS
• Proper Installation
• Start-up Procedures
• Operation Procedures
• Routine Maintenance
• Pump Overhaul
• Trouble Shooting
• Ordering Spare or Repair Parts