4 operation, 1 switching on the meter, Operation – Xylem Lab 970 User Manual
Page 19: Switching on the meter, 4operation
Advertising

Lab 970
Operation
19
ba75558e03
11/2009
4
Operation
4.1
Switching on the meter
Note
The meter has an energy saving feature to avoid unnecessary battery
depletion during battery operation.
The energy saving feature switches off the meter if no key was pressed
during the specified interval (setting the switch-off interval see
page 44).
The energy saving feature is not active:
z if the meter is supplied via the power pack or the USB interface
z automatic storingif the printer cable is connected (for external
printers).
1
Place the meter on a flat surface and protect it from intense
light and heat.
2
Press the <On/Off>
key.
A display test is briefly displayed.
Subsequently, the meter switches to the measuring mode
(measured value display).
Advertising