Xylem IM 28 ACT 909 Tankless Mounting Bracket Instructions (obsolete) User Manual
Page 2
ITT
3878 S. Willow, Suite 104
Fresno, CA 93725
Tel: (559) 265-4730 (800) 554-6853
Fax: (559) 265-4740 (800) 453-7523
www.lainginc.com
Copyright © 2009 ITT Corporation,
Printed in the U.S.A 01-10 IM-28
THE ITT ENGINEERED BLOCKS
SYMBOL AND ENGINEERED FOR LIFE
ARE REGISTERED TRADEMARKS OF
ITT MANUFACTURING ENTERPRISES,
INC.
fig. 7
With all 4 grommets in place, mark and drill the holes that
correspond with the holes in the back of the bracket.
fig. 8
Push the red plastic anchors in to the drilled holes.
fig. 9
Locate the 4 long screws.
fig. 10
Using the screws, attach the mounting bracket to the wall.
fig. 11
Locate the 4 short screws.
fig. 12
Attach the pump’s bracket ears to the mounting bracket using
the 4 short screws
13. Reattach hoses to the pump; turn the angle stop valves on.
Plug in the pump, and turn the pump “On”.