Extron Electronics FOX T UWP 302 User Guide User Manual
Page 33
5.
Click the
Begin
button. This uploads the new firmware onto the connected device.
The
Progress
field for the selected device shows the progress of the upload. After the
upload is complete, this field is blue and shows
100%
.
6.
Exit Firmware Loader.
7.
From the
File
menu of the FOX Extenders Control Program, select
Connect
to
re-establish communication with the device.
8.
Re-enter the connection information in the Connect dialog box to re-establish
communication with the device.
See the Firmware Loader Help File and supporting documentation for further information
about using Firmware Loader.
Refresh
The Refresh option refreshes the main screen of the FOX Extenders Control Program
without restarting the application. This is useful if connection to a device is lost (such as if
the unit has been unplugged accidentally) or settings change on the device.
From the
Tools
menu, select
Refresh
. Alternatively, click the
icon.
Trace Window
The Trace Window option displays data sent to and received from the device in a separate
window for troubleshooting.
Figure 19.
Trace Window Dialog Box
1.
From the
Tools
menu, select
Trace Window
. The Trace Window dialog box opens.
2.
To clear existing information, click the
Clear
button.
3.
Click the
Close
button to close the Trace Window dialog box.
FOX T UWP 302 Wallplate Transmitter • FOX Extenders Control Program
27