Extron Electronics IN1502 Setup Guide - Manual (Page 15)

Refer also to the IN1502 User’s Manual at www.extron.com.
Picture control
The following flowchart provides an overview of the Picture
control submenus. Picture controls allow adjustment of each
input for optimum picture quality of the output display. The
picture controls are active for the input currently selected.
NEXT NEXT NEXT
NEXT NEXT
NEXT
COL TINT
128 128
H CNTR V
128 128
DETAIL
016
PICTURE
CONTROL
Default
Cycle
H SIZE V
128 128
BRT CONT
128 128
MENU
Brightness and Contrast
• Brightness range: 000 to 255.
• Contrast range: 000 to 255. Color and Tint
• Color range: 000 to 255.
• Tint range: 000 to 255. Horizontal and Vertical Centering
• H centering range: 000 to 255.
• V centering range: 000 to 255.
Horizontal and Vertical Sizing
• H size range: 000 to 255.
• V size range: 000 to 255.
Default values are shown.
Detail
• Detail (sharpness) ranges
from 000 to 063.
Picture Control submenus
Brightness and contrast
To adjust for maximum brightness and uniformity between
the inputs without overdriving the output display, rotate the
horizontal Adjust ([) knob to adjust brightness and vertical
Adjust ({) knob to adjust contrast.
Color and tint
To adjust for proper color saturation and tint, and for uniformity
between the inputs, rotate the horizontal Adjust ([) knob to
adjust color and the vertical Adjust ({) knob to adjust tint.
Horizontal and vertical centering
To adjust horizontal and vertical centering of each input on the
output display, rotate the horizontal Adjust ([) knob and the
vertical Adjust ({) knob.
Horizontal and vertical sizing
Rotate the horizontal Adjust ([) knob to adjust horizontal
sizing and the vertical Adjust ({) knob to adjust vertical sizing of
each input on the output display.
Detail
Detail (sharpness) is used to compensate for long cable runs.
Using either knob, adjust to restore fine detail of each input in
the output display.
IN1502 • Front Panel Operation 2-5