Astro Pneumatic 78930 15pc Master Disconnect Kit User Manual
Warning, 15pc. master disconnect kit, Intended use of the tool
78930
• A complete set of disconnect tools stored in a handy blow-molded case
Fuel & Transmission Line Disconnect Set
• Anodized aluminum
• Separate fittings on fuel lines, fuel filters & fuel tank return lines
• Sizes: 1/4", 5/16" & 3/8" Oil Cooler Line Disconnect Tool
• Separates automatic transmission oil cooler lines on Ford Taurus
and Escort with AXOD and ATX transmissions
• Fuel line disconnect tool allows damage free fuel line quick connect
coupler release
• Fits any 5/16" or 3/8" fuel line found on GM, Ford or Chrysler cars
• Ford fuel line coupling tool provides easy, damage-free fuel line separation
• Works on 1990 and newer Ford Ranger and Explorers with 4.0L, 6 cylinder engines
• Disconnect tool allows quick separation of quick connectors found on radiators,
transmissions and power steering lines
• Releases the fingers on transmission-to-radiator oil cooler line easily without
damage to the hose or connector
• Works on 1986 and newer Ford Taurus and Mercury Sable with an AXOD, AOD
or ATX transmission
• Quick disconnect coupler tool slides down the line and into the connector; separating the clip apart
without damaging the quick connect seals allowing removal of clip
• Works on late model Ford and GM vehicles
Oil Cooler Line Remover
• Anodized aluminum
• This unit is used to disconnect transmission oil cooler lines
• Works on 2003 and 2004 Ford Explorer (V8), 2004 Ford F150, and 2004 Cadillac CS
• Unique design to clear the flare and disconnect the new style clips
Air Conditioning & Fuel Line Disconnect Tool Set
• Sizes 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8" Air Conditioning & Fuel Line Disconnect Tool
• Allows easy disconnection of air conditioning lines & quick connect fuel lines
• Six distinctive tools allow the disconnecting of spring lock couplings air conditioning
lines found on Ford and Chrysler
• Allows usage on fuel line quick connect couplings found on GM, Ford, and Chrysler
• 5/16" Disconnect Tool allows usage on push lock connectors found on Ford
radiators and transmission lines
Page 1
When unpacking, check the parts diagram and part number listing
on page 2 to make sure all parts are included. If any parts are
missing or damaged, please call your distributor.
Unpacking
www.astrotools.com
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9705 FOR INSTRUCTIONS
MADE IN CHINA
• Astro Pneumatic Tool Co. warrants our products to the original user against defective
material or workmanship for a period of 1 year (except where noted on our price
schedule) from the date of 1st use. Astro reserves the right to determine whether the
product failed because of defective material, workmanship or other causes and to charge
back for missing parts. Astro Pneumatic Tool Co., at its discretion, will repair products
covered under this warranty free of charge. The distributor should direct the original user
to return the product (with the exceptions listed below) with the distributor’s name,
address, adequate proof of date of purchase or a copy of warranty card, and a short note
explaining the problem.
Failures caused by accident, alteration, or misuse are not
covered by this warranty.
• If one part of this product fails, please do not return the entire product. Astro will
replace free of charge component parts of this product that fail within 1 year of first
use by the original user. Items included in this category include but are not limited
to kits, hand tool kits and any other product where there are multiple items or
components that make up the unit. Please contact the phone number below in
order to obtain the replacement components covered under warranty.
• Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and may
not be transferred to subsequent owners.
• This warranty is in lieu of all other warranties, expressed or implied, including warranties
of merchantability and fitness for a particular purpose. Some states do not allow the
exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you.
1 YEAR LIMITED WARRANTY
PRODUCT INFORMATION:
15pc. MASTER DISCONNECT KIT
15pc. MASTER DISCONNECT KIT
Study, understand and follow all instructions provided with this product.
Read these instructions carefully before installing, operating, servicing
or repairing this tool. Keep these instructions in a safe accessible place.
• Normal use of this product is likely to expose the user to
dust and/or microscopic particles containing chemicals
known to the State of California to cause cancer, birth
defects or other reproductive harm. Always wear
appropriate safety equipment and clothing when using this
product. Study, understand and follow all instructions
provided with this product. Failure to read and follow all
warnings and operating instructions may result in damages
and serious injury or death.
• Always wear ANSI approved goggles when using this
product. (Users and Bystanders).
• Never use this tool for any application other than for
which it was designed.
• Only use accessories designed for this tool.
• Never alter or modify this tool in any way.
• Improper operation and/or maintenance of the tool,
modification of the tool, or use of the tool with accessories
not designed for it could result in serious injury or death.
• Always select the correct accessories of the correct size
and design for the job that you are attempting to perform.
• Always work in a clean, safe, well-lit, organized and
adequately equipped area.
• Do not begin repairs without assurance that vehicle is in
secure position, and will not move during repair.
WARNING
This set is intended to be used to separate specific fittings on
fuel lines, fuel filters, fuel tank return lines, transmission oil
cooler lines, power steering lines, air conditioning lines. See
“Product Information” section of this manual for further
specific information.
INTENDED USE OF THE TOOL
WARNING
DO NOT DISCARD – GIVE TO USER