BeStar BPT6012H14-01LF - Manual (Page 5)

A
Page:4 of 6
B
C
D
E
F
G
H
Note REV.
A
Date Drawn
6 5
Date:
Approved by:
4 3
Checked by:
Drawn by:
2 1
Piezo Sounder
T
h
is
p
ri
n
t
and
i
n
fo
rm
a
ti
on
t
he
re
i
n
a
re
p
rop
ri
e
ta
ry
t
o
B
e
s
ta
r E
le
c
tr
on
ics
I
ndu
s
tr
y
C
o
.,
L
td
.
and
s
ha
ll
no
t
be
u
s
ed
i
n
w
ho
le
o
r
in
p
a
rt
w
it
hou
t
it
s
wr
itt
en
c
on
tent
B
C
D
E
F
G
H
6 5 1 3 2 4
www.be-star.com [email protected]
BESTAR ELECTRONICS INDUSTRY CO.,LTD
A
BPT6012H14-01 LF
4. Mechanical requirement
piezo electrical connectors:
The electrical connectors must be soldered directly on the piezo.
The wires must be very flexible,supple.
The rigidity of the piezo electric wires should be improved by the following test
The piezo and the connector should be strongly fixed on their support
A weight of 1Kg is suspended at the middle of the wires
The duration of the test is 2 hrs
After the test no alteration of the technical characteristics is allowed
5.Notice
5.1 The products mustn't be washed
5.2 Storage Condition
The products should be stored in the room ,where the temperature/humidity is stable. And avoid such
places where there are large temperature changes. Please store the products at the foll-
owing conditions:
Temperature: -10 to + 40 C Humidity: 15 to 85% R.H.
5.3 Expire Date on Storage
Expire date (Shelf life) of the products is six months after deliveried under the conditions of a
sealed and an unopened package. Please use the products within six months after deliveried.
If you store the products for a long time (more than six months), use carefully because the
products may be degraded in the solderability and/or rusty.Please confirm solderability and
characteristics for the products regularly.
5.4 Notice on Product Storage
(1) Please do not store the products in a chemical atmosphere (Acids, Alkali, Bases, Organic
gas, Sulfides and so on), because the characteristics may be reduced at quality, and/or be d-
egraded in the solderability due to the storage in a chemical atmosphere.
(2) Please use the products immediately after the package is opened, because the character-
istics may be reduced at quality, and/or be degraded in the solderability due to storage under
the poor condition.
(3) Please do not drop the products to avoid cracking of ceramic element.
Piezo
Wires
Connector
1Kg
Piezo
Wires
Connector
1Kg
BPT6012H14-01 LF
DRG NO: BS/TEP01.537A
08/01/04
赵 峥
陶红仲
张秀琴
赵 峥 08/01/04