BVA Hydraulics P350, P601S, P1000, P1000AD, P2001 - Manual (Page 2)

Handle
Release Valve
Reservoir
Spring Loaded
Handle Lock Pin
Oil Filler Plug/ Vent Plug
Oil Outlet Port
1/4”-18NPTF (P350)
3/8” -18NPTF (P1000)
SAFETY AND GENERAL INFORMATION
Save these instructions. For your safety, read and understand the information contained within. The owner and operator shall
have an understanding of this product and safe operating procedures before attempting to use this product. Instructions and
safety information shall be conveyed in operator’s native language before use of this product is authorized. Make certain that the
operator thoroughly understands the inherent dangers associated with the use and misuse of the product. If any doubt exists as
to the safe and proper use of this product as outlined in this factory authorized manual, remove from service immediately.
Inspect before each use. It is recommended that, prior to each use, an inspection be done by qualified personnel and that any
missing or damaged parts, decals, warning/safety labels or signs be replaced with factory authorized replacement parts only. Any
pump that appears to be damaged in any way, is worn, leaking or operates abnormally shall be removed from service immediately
until such time as repairs can be made. Owners and operators of this equipment shall be aware that the use and subsequent
repair of this equipment may require special training and knowledge.
PRODUCT DESCRIPTION
BVA Hydraulic Hand Pumps are engineered to meet most industrial standards for Performance and Safety. Hand Pump model
number P350, P1000, P1000AD and P2001 have a unique 2 stage hydraulic circuit, which allows quick displacement of hydraulic
fluid under no load conditions and easy pumping in loaded conditions. These lever operated pumps supply compressed hydraulic
fluid to compatible applications i.e. rams, presses, spreaders, compactors and crimping machines, anywhere that 10,000 PSI
of fluid pressure is needed. Special skill, knowledge and training may be required for a specific task and the product may not
be suitable for all the jobs described above. Unsuitable applications would include applications that call for a device to move,
level or support persons, animals, hazardous materials, mobile homes/ dwellings in general, mirrors and/or plate glass, and/or to
connect/secure hatches, components, etc. between bulkheads. The user must ultimately make the decision regarding suitability
of the product for any given task and assume the responsibility of safety for himself and others in the work area.
WARNING: Always check connections before using. Alteration of these products is strictly prohibited. Use only those
adapters and attachments provided and approved by the manufacturer.
WARNING: To reduce the risk of personal injury and/or property damage, ensure that the rated working pressure of each
pressurized attachment be equal to or greater than the rated working pressure developed by the hydraulic pump.
WARNING: Model P601S is operated with a non-vented reservoir. If the reservoir is subjected to high pressure, the casing
may rupture. Never attempt to return more oil to the reservoir than it is capable of holding.
Figure 1 - Model P350 and P1000 Components
2
Figure 2 - Model P601S Components
Figure 3 - Model P1000AD Components Figure 4 - Model P2001 Components
Handle
Reservoir
Vent Screw
Oil Outlet Port
3/8” -18NPTF
Release
Valve
Reservoir
Oil Filler Screw
Handle
Oil Outlet Port
3/8” -18NPTF
Handle Lock Latch
!
!
!
Oil Outlet Port
3/8” -18NPTF
Release Valve
Spring Loaded
Handle Lock Pin
Reservoir
Oil Filler Plug/ Vent Plug
Handle