DE-STA-CO 722 INTERMITTOR - Manual (Page 2)

INTRODUCTION
This manual is supplied to aid in the installation and maintenance of your Ferguson-
brand index drive.
When contacting Industrial Motion Control, please have the serial number of your unit
available. This number can be found on the serial number tag.
To determine the model number and the ratio of a Ferguson reducer, refer to the tag
which is located on the reducer housing. If the reducer is by another manufacturer,
refer to that manufacturer's nametag located on the reducer housing.
Unit configurations, reducer mounting positions, and hand of cam nomenclature can
be found inside the back cover of this manual. These will aid in describing your unit.
Industrial Motion Control provides factory rebuild or repair services at our centrally
located Wheeling, IL facility. Industrial Motion Control can also provide technicians or
engineers for field service calls worldwide.
If you have any questions or problems, please feel free to contact our
Technical Service Department at:
1-800-645-5207 or 1-847-459-5200, FAX: 1-847-459-3064,
or EMAIL: [email protected].
If you need to contact a sales representative in your area, you can log on to our web
site: www.camcoindex.com and go the section labeled "Find a local Rep" to find the
sales office that is nearest to you.
At Industrial Motion Control, it is our policy to provide the highest quality products that
meet or exceed our customer's requirements. In order to achieve this commitment,
Industrial Motion Control has documented its policies and procedures to be in
compliance with ISO-9001.
INTRODUCTION