Control panel and components, 1 automatic distance and diameter gauge, 2 automatic width gauge (optional) – CEMB USA C73-L SE (B) User Manual
Page 10
10
Use and maintenance manual Rev. 09-2009
ENGLISH
Control panel
CAUTION
P
RESS
THE
BUTTONS
WITH
YOUR
FINGERS
.
N
EVER
USE
THE
COUNTERWEIGHT
GRIPPERS
OR
OTHER
POINTED
OBJECTS
!
T
HE
TFT
MONITOR
IS
NOT
A
TOUCH SCREEN
TYPE
.
4.1
AUTOMATIC DISTANCE AND DIAMETER GAUGE
This gauge allows measurement of the distance of the wheel from the machine and the wheel diameter at the point of appli-
cation of the counterweight. It also allows correct positioning of the counterweights on the inside rim by using the specifi c
function (
INDICATION OF EXACT CORRECTION WEIGHT POSITION
) which allows reading, on the monitor, the position
used for the measurement within the rim (for calibration, see the corresponding section).
4.2 AUTOMATIC WIDTH GAUGE (OPTIONAL)
Width gauging is through a SONAR device which measures the distance of the wheel without mechanical contact, merely
by closing the guard and each time a valid measurement has been made with gauge
AUTOMATIC DISTANCE AND DIAMETER
GAUGE
.
4.
Control panel and components
FUNCTION KEYS: they directly select the function on screen
Starts measuring
cycle
Selection of special
function
Confi rm
Stops machine
cycle