CEMB USA C65 (F) - Manual (Page 17)

I 0426 - 16 I 0426 - 17 GB GB
5.5.3 - Unbalance optimization
The symbol is displayed automatically for static unbalance exceeding 30 grams (1.1 oz). The program
allows reducing the total unbalance of the wheel by compensating, when possible, the unbalance of the tyre with that
of the rim. It requires two spins with rotation of the tyre on the rim in the second spin.
Press +
3
after a first spin and follow the instructions appearing on the monitor.
5.5.4 - ALU and static modes
From the Measurement screen, press button
2
: a window with the possible modes appears.
Select the type required through the numeric keys. The return to the Measurement screen with the recalculated
values is automatic. A symbol always appears at the top of the screen indicating the enabled weight application
position.
UNBALANCE OPTIMIZATION
Make sure that the previous spin was made with the wheel now fitted on the wheel
balancer.
Trace the rim adaptor position with a reference mark to allow re-assembling on the
adaptor in the same position.
Remove the wheel from the balancer.
Turn the tyre 180° on the rim.
Re-assemble the wheel on the balancer by positioning the rim reference mark with
the adaptor’s.
Close the wheel guard and push (START)
Abort
CORRECTION TYPE
STATIC
DYNAMIC