Apple Color StyleWriter 2500 - Manual (Page 115)

This appendix explains how to use the QuickDraw GX software with the
Color StyleWriter 2500. (If you installed QuickDraw GX after you set up your
printer, you must reinstall the Color StyleWriter 2500 software.)
Telling your computer to use the Color StyleWriter 2500 with QuickDraw GX
Make sure the printer and your computer are connected and turned on.
1 Select the Chooser from the Apple (
K
) menu.
2 In the Chooser dialog box, use the “Connect via” pop-up menu to choose the
appropriate type of connection.
Note: If QuickDraw GX is installed on your Macintosh, background printing
is always on and cannot be turned off.
Appendix E
Printing with QuickDraw GX
If the printer is connected
directly to your Macintosh
with a serial cable,
choose Serial.
If the printer is connected to
a Macintosh on the network
and is available as a shared
device, choose Servers.
If the printer is connected to
the AppleTalk network,
choose AppleTalk.
115