Burkert Type 1066 - Manual (Page 19)

1066 - 17
I
NSTALLATION AND
C
OMMISSIONING
english
Electrical installation
NOTE
8-pole screw terminal for 24 V DC
(in interior of housing, cable duct with screw fitting for cable)
V = valve
S = proximity switch (sensor)
The outputs of the proximity switches are pnp-plus switching and are short-circuit proof.
LED status display 24 V DC
Ground
Switched signal of the external
proximity switch S3
Power supply
Layout of the 8-pole screw terminal
There are different ways of electrically connecting control heads without communication.
On the model for 24 V DC, status per valve is displayed uniformly with an LED in each case.
Control heads without communication