ELRO C935IP Plug & play network camera HD USERS MANUAL - Manual (Page 7)

SAFETY AND INSTALLATION TIPS
Do not attempt to open the units with the power adaptor plug connected to
avoid any risk of personal injury.
When installing CCTV camera(s), always follow manufacturer's advice
when using power tools, steps, ladders, etc. and wear suitable protective
equipment (e.g. safety goggles) when drilling holes. Before drilling holes
through walls, check for hidden electricity cables and water pipes. The use
of cable/pipe detector is advisable.
It is also advisable to avoid exposing any cameras to extreme weather
conditions (e.g., under a gutter which is prone to any water leaks). When
installing any cameras with this unit, it is advisable to use cable conduit to
protect any video/power extension cables from being exposed externally
and to prevent/reduce the chances of the cables being tampered with. After
drilling any hole though an external wall for a cable, ensure the hole is
sealed up around the cable using a sealant to prevent drafts.
To prevent a fire or electrical shock hazard, do not attempt to open the
housing while the unit is exposed to rain, water or wet conditions. There
are no user serviceable parts inside. Refer servicing to qualified service
personnel. Avoid pointing the camera(s) directly at the sun or any bushes,
tree branches or moving objects that might unnecessarily cause the camera
to record.
5