Gardner Bender BF90 Conversion Kit - Manual

WARRANTY: GB ELECTRICAL, INC. warrants its
products against defects in workmanship and materi-
als for 1 year from date of delivery to user. Chain is not
warranted. Warranty does not cover ordinary wear and
tear, abuse, misuse, overloading, altered products or
use of improper fluid. WARRANTY RETURN PROCEDURE: When question
of warranty claim arises, send the unit to the nearest
GB Authorized Service Center for inspection, trans-
portation prepaid. Furnish evidence of purchase date.
If the claim comes under the terms of our warranty the
Authorized Service Center will REPAIR OR REPLACE
PARTS AFFECTED and return the unit prepaid. PARTS AND SERVICE: For quality workmanship and
genuine GB ELECTRICAL parts, select an Authorized
GB Service Center for your repair needs. Only
repairs performed by an Authorized Service Center
displaying the official GB Authorized sign are backed
with full factory warranty. Contact GB Electrical
(414) 352-4160 for the name of the nearest GB
Authorized Service Center.
REPAIR AND SERVICE INSTRUCTIONS: For repair service and parts contact your nearest GB ELECTRICAL
Service Center. The Service Center will provide complete and prompt service on all GB ELECTRICAL products.
GB Electrical, Inc.
An Applied Power Company 6101 N. Baker Road, Milwaukee, WI 53209
Phone: (414) 352-4160
FAX (414) 352-2377
RPS-0123 Rev. A 03/07
Gardner
Bender
IMPORTANT: RECEIVING INSTRUCTIONS
Visually inspect all components for shipping damage.
If any shipping damage is found, notify carrier at once.
Shipping damage is NOT covered by warranty. The
carrier is responsible for all repair or replacement
costs resulting from damage in shipment.
IMPORTANT: When using shoes for up to 2" EMT, use washer and pin.
When using a 2" shoe, a strap is used with the pin (no washer). Order the strap separately.
Drill 1 ⁄ 4 ” diameter hole through
both walls of frame tube
Attach insert to bender frame with
two spring pins through 1 ⁄ 4 ” diameter
hole drilled in frame tube
15 ⁄ 16 ”
90˚ ± 15˚
Retaining
Lever
Conversion Kit required to retrofit BF1000 & BF1100 bender set with new shoe retainer assembly.
①
②
Instruction
Sheet
Conversion Kit
BF90