Green Air Products Genesis pH Raise MSDS - Manual (Page 3)

SECTION 7 - HANDLING AND STORAGE
HANDLING: Do not breathe vapor. Do not get in eyes, on skin or on
clothing. Wear protective equipment as indicated.
STORAGE: Store in a cool, well-ventilated place away from sources of
heat, moisture or incompatible materials. Store away from
acids and Ammonium salts. Do not store in Aluminum or
galvanized containers. Do not use die cast Zinc or Aluminum
in conjunction with this material.
SECTION 8 - EXPOSURE CONTROL/PERSONAL PROTECTION
ENGINEERING CONTROLS: Provide local and/or general exhaust ventilation to keep
exposure level below the OSHA standard. Local exhaust
ventilation is preferred because it can control the emissions of
the contaminants at its source preventing its dispersion into
the general work area.
PERSONAL PROTECTION: Avoid skin and eye contact and inhalation of mist. Wear
overalls, safety glasses or goggles and face shield, chemical
resistant gloves, chemical suit and boots. Respiratory
protection is required if airborne concentration is high or
unknown. Use a respirator if there is a risk of inhaling mist
spray. Always wash hands before smoking, eating, drinking or
using the toilet.
SECTION 9 - PHYSICAL/CHEMICAL PROPERTIES
APPEARANCE and ODOR: Clear viscous liquid, odorless
AUTOIGNITION TEMPERATURE: N/A
BOILING POINT: 271-293ºF (133-145ºC)
EXPLOSION LIMITS: N/A
FLASH POINT: N/A
FREEZING POINT 50ºF (10ºC)
MELTING POINT: N/A
pH: 14
SOLUBILITY IN WATER: Completely soluble in water
SPECIFIC GRAVITY: 1.5
VAPOR DENSITY: not available
VAPOR PRESSURE: 27 mm Hg at 140ºF (60ºC)
VISCOSITY: 6.10 x 10-3 Kg/m.s.
SECTION 10 - STABILITY AND REACTIVITY
STABILITY: Stable. No known explosion or stability hazards.
REACTIVITY: This product generates heat on dilution with water. Heat
evolved may cause boiling or spattering. Corrosive to
Aluminum, Zinc and Tin, and produces Hydrogen gas. Reacts
violently with acids. Reacts with Ammonium salts generating
Ammonia gas. Absorbs water and CO2 from the air.
3