American Dryer Corp. AD-50V - Manual (Page 36)

32
2. Technical Gas Data
a. Gas Specifications
b. Gas Connections
Inlet connection -------------1/2-inch N.P.T.
Inlet supply size -------------1/2-inch N.P.T. (minimum)
Btu/hr input (per dryer) ----78,000 (19,656 kcal/hr) AD-25
90,000 (22,680 kcal/hr) ADG-30
130,000 (32,760 kcal/hr) ADG-50
1) Natural Gas
Regulation is controlled by the dryer’s gas valve’s internal regulator. Incoming supply pressure
must be consistent between a minimum of 6.0 inches (14.92 mb) and a maximum of 12.0 inches
(29.9 mb) water column (W.C.) pressure.
2) Liquid Propane (L.P.) Gas
Dryers made for use with L.P. gas have the gas valve’s internal pressure regulator blocked open so
that the gas pressure must be regulated upstream of the dryer. The pressure measured at each
gas valve pressure tap must be a consistent 10.5 inches (26.1 mb) water column. There is no
regulator or regulation provided in an L.P. dryer. The water column pressure must be regulated at
the source (L.P. tank) or an external regulator must be added to each dryer.
* Drill Material Size (D.M.S.) equivalents are as follows:
Natural Gas ........................ #30 = 0.1285” (3.2639 mm).
#31 = 0.1200” (3.048 mm).
#25 = 0.1495” (3.7973 mm).
Liquid Propane Gas... ........ #46 = 0.0810” (2.0574 mm).
#43 = 0.0890” (2.2606 mm).
#50 = 0.0700” (1.778 mm).
TYPE OF GAS
NATURAL LIQUID PROPANE
Manifold Pressure* 3.5 inches W.C. 8.7 mb 10.5 inches W.C. 26.1 mb
In-Line Pressure 6.0 - 12.0 inches W.C. 14.92 - 29.9 mb 11.0 inches W.C. 27.4 mb
Shaded areas are stated in metric equivalents
* Measured at outlet side of gas valve pressure tap when gas valve is on.
AD-25
/
ADG-30/ADG-50
TYPE OF GAS
L.P.
Conversion
Kit
Part Number
ADC
MODEL
NUMBER
BTU
Per Hour
Rating
kcal/hr
Rating
Natural Liquid Propane
Qty. D.M.S.*
Part
Number
Qty. D.M.S.*
Part
Number
AD-25 78,000 19,656 2 #31 140818 2 #50 140802 874052
ADG-30 90,000 22,680 2 #30 140819 2 #46 140806 874050
ADG-50 130,000 32,7600 2 #25 140853 2 #43 140809 874044
Shaded areas are stated in metric equivalent